Proteinfarbstoff RuBPS (Dye Hard) sensationell günstig 1unit, für SDS-Gel und Western Blottgeeignet für SDS-Page,2D-Page,native-Page und 16-Bac Gele1unit=3l Färbelösung für 60 schmale SDS-Gele oder 15 large 2-D-Gels
Die Gelelektrophorese ist eine oft angewendete Analysetechnik in den Functional Genomics and Proteomics. Das Färben von Proteinen und die danach nötige Analytik ist zeit- und kostenintensiv. RuBPS reduziert ihre Kosten weil es sich mit fast allen Analysetechniken problemlos kombinieren lässt. RuBPS gefärbte Proteine lassen sich per MS und PMF identifizieren. Die gefärbten Proteine lassen sich aber auch einfach auf eine Membran (PVDF, Nitrozellulose) übertragen und per Antikörper nachweisen. RuBPS gefärbte Gele lassen sich sequentiell färben oder ohne Signalverlust eintrocknen. Kein anderer Proteinfarbstoff bedient eine vergleichbare Bandbreite an Anwendungen.Schnellfärbung in nur einer Stunde (5)Überragendes Signal zu Hintergrund Verhältnis (3)starke, uniforme, reproduzierbare Signale, linear im Bereich 2 ng bis 10 ?g Protein (3)Anregungswellenlängen 300 – 500 nm, Detektion 600 -610 nmDetektierbar mit allen Typen von Laser-Scannern und UV-TransilluminatorenKompatibel mit MS (2) und Western Blott (6)Seriell kompatibel mit Coomassie Blue, Silbernitrat (8), Emerald-Q und den Cye Dyes (7)Lange Lagerstabilität von RuBPS> 5 Jahre“Löschbare“ Signale(1) T. Rabilloud, J. M. Strub, S. Luche, J. L. Girardet, A. van Dorsselaer, J. Lunardi, Proteome 2000, 1, 1(2) T. Rabilloud, J. M. Strub, S. Luche, A. van Dorsselaer, J. Lunardi, Proteomics 2001, 1, 699.(3) A. Lamanda, A. Zahn, D. Roder, H. Langen, Proteomics 2004, 4, 599(4) C. Bachler, P. Schneider, P. Bahler, A. Lustig, B. Erni, Embo J 2005, 24, 283.(5) A. Lamanda, Z. Cheaib Z, MD Turgut. PLoS ONE 2007 ,2, e263.(6) M. Kaeslin, R. Pfister-Wilhelm, D. Molina, B. Lanzrein, J Insect Physiol 2005, 51, 975.(7) T. Stasyk, S. Morandell, R. Bakry, I. Feuerstein, C. W. Huck, G. Stecher, G. K. Bonn, L. A. Huber, Electrophoresis 2005, 26, 2850(8) M. Hampel, B. Sehnert, M. Karas. Signal Transduction in press
1.RuBPS staining protocol I (quality):1. Fix the gel in 30% EtOH, 10% acetic acid overnight2. Rinse the gel in 20% EtOH for 30 min and repeat 3 times3. Incubate the gel in 1 µM RuBPS solution for 6 h4. Equilibrate the gel in water for 10 min and repeat once5. Destain the gel with 40% EtOH/10% acetic acid for 15 h6. Equilibrate the gel in water for 10 min repeat once and scanall% are in V/V Procedure as published in Proteomics 2004, 4, 599–608
RuBPS staining protocol II (fast):1. Incubate the gel in 50 ml of 40% Ethanol/10% acetic acid containing 1 µM RuBPS for 1 h.2. Destain the gel for 20 min in 40% Ethanol/10% acetic acid3. Wash the gel for 10 min in water and scanall% are in V/V Procedure as published in PLoSONE. 2007 Feb 28,2(2)e263
RuBPS staining protocol III (co-electrophoretical)1. Add 1 ml of 20 mM stock solution to one pocket of your SDS gel. Run the gel according to your standard procedure.2. Incubate the gel in 50 ml of 40% Ethanol/10% acetic acid for 20 min3. Incubate the gel in 50 ml water for 10 min and scan
RuBPS staining protocol IV (loading buffer1. Add 1 ml of 20 mM stock solution to your loading buffer (omit all other dyes like bromophenol blue). Run the gel according to your standard procedure.2. Incubate the gel in 50 ml of 40% Ethanol/10% acetic acid for 20 min3. Incubate the gel in 50 ml water for 10 min and scan
Preparation of RuBPS staining solution
- Preparation of the staining solution: Dissolve 5 mg of RuBPS (one unit) in 3L of deionised water to have a 1 mM RuBPS staining solution.
- Preparation of the staining solution from a stock solution: Dissolve 5 mg of RuBPS (one unit) in 150 ml of deionised water to have a 20 mM stock solution.Dissolve 50 ml of the 20 mM stock solution to have a 1 mM RuBPS staining solution
Western Blotting of RuBPS stained proteins
A. RuBPS staining protocol I (quality)
- 1. Fix the gel in 30% EtOH, 10% acetic acid overnight
- 2. Rinse the gel in 20% EtOH for 30 min and repeat 3 times
- 3. Incubate the gel in 1 mM RuBPS solution for 6 h
- 4. Equilibrate the gel in water for 10 min and repeat once
- 5. Destain the gel with 40% EtOH/10% acetic acid for 15 h
- 6. Equilibrate the gel in water for 10 min repeat once and scan
- all% are in V/V
- Procedure as published in Proteomics 2004, 4, 599–608
B. Western Blotting
- 1. Equilibrate RuBPS stained 2-D gels, SDS gels, PVDF and nitrocellulose membranes were equilibrated in a blotting buffer (50 mM boric acid, pH 9.0) for 30 min.
- 2. Transfer the stained proteins to a nitrocellulose membrane (or a stack of up to 8 membranes) for 45 min. at 200 mA and 500 V or to a PVDF membrane for 90 min. at 200 mA and 500 V under cooling. Scan the membrane.
- 3. Wash the membrane(s) twice with TBS (10 mM Tris/HCl pH 8.0, 150 mM NaCl) and saturated with TBS containing 1% w/v milk powder for 10min
- 4. Incubate the membrane(s) overnight with a the antibody I (specific antibody against the protein you want to detect) (1:5000) in TBS containing 0.5% w/v BSA.
- 5. Rinse short with TBS
- 6. Incubate the membrane(s) with antibody II (antibody against antibody I) (1:5000) in TBS, 0.5% w/v BSA for 2 h.
- 7. After the reaction stopped, wash the membrane twice in 0.5% TBS for 3min
- 8. Treat the membrane(s) with peroxidase staining solution (TBS, 6% v/v chloro-1-naphthol 0.3% w/v in MeOH, 0.002% v/v H2O2 30%) for 2 to 5 min.
- 9.Store the membrane(s) in 0.5% TBS and scan again.
FAQs about RuBPS:
- 1. How many gels can be stained with one unit of RuBPS and what are the costs per gel? From one unit RuBPS is sufficient to prepare 3 litres of staining solution. 3 L of staining solution is enough to stain 15 large (24cm) 2D-gels or 60 small SDS gels.This means that RuBPS is about 20 times cheaper than other comparable dyes. RuBPS has absolutely no competitor concerning the costs.
- 2. Is RuBPS difficult to handle? No it isn´t. You just open the vial, dissolve the RuBPS powder in 3 L of water, that´s it
- 3. What are the shipping costs? We sell the only dye and not water! Shipping milligrams of dye is much cheaper than shipping tons of water as most our competitors do. So it easy to understand that shipping milligrams of dye saves your time and your money! So the shipping costs a as low as (Germany 5EUR)
- 4. What is the stability of RuBPS? RuBPS is sold as solid powder. In this physical form RuBPS is rock stable for years without cooling.As soon as it is dissolved to 20 mM, RuBPS is stable at least for 5 Years is stored in a dark bottle at 4°C (normal fridge).
- 5. How long does it take to stain a gel with RuBPS? The staining of one gel with RuBPS will take about 1 hour. So it is as fast as CBB staining but much more sensitive with a much broader linear dynamic range.
- 6. Is RuBPS compatible with MS? Yes it is. It is equal to CBB but has a 4-times increased sensitivity and a much broader linear dynamic range.
- 7. Is RuBPS compatible with blotting procedures? Yes it is. We sell you a dye for gel- and blott-staining. Just stain your gel with RuBPS, scan it, and then do the transfer to the membrane (nitrocellulose or PVDF). Scan the membrane, and you receive a copy of your gel on the membrane. RuBPS does not interfere with the immunodetection! So you can detect all protein spots in the gel and on the membrane copy and specifically label your target protein at once! No other dye can do this. For the same purpose our competitors will sell you two staining solutions, which mainly contain water, at a 40 times higher price. As solutions are heavy they cause high shipping costs and take you a lot of space for storage. There is no need to buy two dyes to stain membranes and gels, but our competitors simply think:why only sell one, if you could sell two for the double price?.
- 8. Is RuBPS a copy of SYPRO Ruby? The answer is no. There were always rumours that RuBPS is a copy of SYPRO Ruby, but as it is well known, it is not The rumour originally came from the Rabilloud article in 2000 where he started these speculations. This rumour was boosted when RuBPS was called “Fluka-SYPRO” by some speakers at the Proteomic Forum 2003 in Munich, Germany. Frequently RuBPS has been called “Home made SYPRO” or “Home brew Version of SYPRO Ruby” which is simply not true. All these rumours are nothing else than false. RuBPS is not SYPRO and was never intended to be SYPRO or to imitate SYPRO.
- 9. What is the meaning of RuBPS? RuBPS is the short form of Ruthenium (II) tris (bathophenantroline disulfonate) also termed as Ruthenium (II) tris (4,7-diphenyl-1,10-phenantrolin disulfonate).
- 10. What is RuBPS? RuBPS is the transition metal complex Ruthenium (II) tris (4,7-diphenyl-1,10-phenantrolin disulfonate).
- 11. Who invented RuBPS? RuBPS was first synthesized as a precursor molecule for a dye used as a non-radioactive label for oligo nucleotides by Prof. Willi Bannwarth (University of Freiburg i.Br. Germany) while he worked at Hoffmann-La Roche in the 80ies. This was published in: Bannwarth W, Schmidt D, Stallard RL, Hornung C, Knorr R, Müller F:Bathophenantroline-rutheium (II) complexes as nonradioactive labels for dideoxy DNA sequencing which can be measured by time-resolved fluorescence techniques. Helv Chim Acta 1988,71:2085-2099.
- 12. Who developed