Overview  >>  laboratory equipment  >>  Centrifuges  >>  Bench-top Centrifuges  >>  centrifuges

Art.No.
Universal 320,bench-top centrifuge, microprocessor contolled, with brushless drive, without rotor, max. capacity 4 x 100 ml,max. RPM (speed) 15,000 min-1, max. RCF 21.382, Weight approx. 29 kg

There are good reasons why they have called these centrifuges UNIVERSAL. Their excellent performance and comprehensive range of accessories enable them to carry out virtually any centrifuging task. In the low speed range, the UNIVERSAL 320 process standard tubes up to a volume of 100 ml, microtitre plates, conical tubes with screw cap, blood collection tubes and cyto accessories. Microlitre tubes can be accelerated to an RCF of 21,382. Centrifuge tubes taking higher volumes (up to 85 ml) also profit from the extraordinary motor power of the UNIVERSAL 320. At an RCF of 9,418, bacteria and yeast sediment quickly and easily.

Performance:

  • High RCF:85 ml tubes up to 9,418
  • High RCF:15 ml tubes up to 16,582
  • High RCF:Microlitre tubes up to 21,382
  • Extremely short run-up and run-down times

    • Design:

  • Metal housing
  • Metal lid
  • Stainless steel centrifuging chamber
  • Viewing port in the lid

    • User-friendliness:

  • Automatic lid-locking
  • Quick-entry foil keypad
  • Easily exchangeable rotors
  • 10 programmable memories

    • Safety:

  • Lid locking and holding during rotor run
  • Emergency lid-lock release
  • Motor-overheating protection
  • Imbalance switch-off
  • Automatic rotor recognition
  • Lid dropping protection

    • Operation and control:

    The display panel and all controls on the UNIVERSAL 320 centrifuges have been designed ergonomically. Information on the display is clearly positioned and perfectly legible. During centrifugation, the actual parameter values are indicated. Nine acceleration and braking ramps, or unbraked run-down, can be preselected Ramp 9 always corresponds to the shortest possible run-up or run-down time. The stored parameter combination remains in the memory even after the centrifuge has been switched off. By entering the rotor radius r/mm, the centrifuge calculates and indicates the rotational speed RPM or the relative centrifugal force RCF. The twist knob allows quick and easy entry or changing of the parameters.

    Digital display and control panel: Keypad:

  • RCF Change-over from RPM to RCF indication
  • SELECT Selection of parameters
  • START Starts centrifugation
  • IMPULS Short cycle mode
  • STOP Stops centrifugation manually
  • OPEN Opens the lid

    • Entry of the parameters

  • P Entry of the program number, 10 programmable memories
  • RCF Entry in increments of 10
  • RPM Entry in increments of 10
  • r/mm Entry of the radius in mm
  • t/min Entry of the centrifuging time in minutes and seconds (max. 99 min : 59 sec)
  • Entry of the acceleration ramp 1 – 9
  • Entry of the braking ramp 1 - 9

    • UNIVERSAL 320 centrifuge

    Dimensions (H x W x D) in mm 346 x 395 x 520

    Weight approx. 29 kg


    		 BAA27301401
    [großes Bild]

    ORDER

    Amount

    		  
    piece         		  Power
     220-240V.50-60Hz 2338 EUR   BAA27301401
     110-127V.50-60Hz 2455 EUR   BAA27301401-01

    URL zu diesem Artikel: https://www.baacklab.de//shop/en/?artnr=BAA27301401

     

       Directly to the next / previous article